Safety Warnings and precautions This sign is to alert the user to the hazard and to provide important information for the user to operate the cold spark machine safely and effectively. A security statement is as following: Warning:This warning alerts you to hazardous or potentially hazardous operations and has given a description of the hazard and neglected the consequences.
1:Product parameters Working Height 1-5M Working Temperature -10℃-50℃ Heating Power 650w 6A (110V Version) 650w 3A (220V Version) Fuse 110V/10A, 220V/6A Interface Double DMX input, Double AC power N.W. 6.3kg Size 205*205*190mm Max. connections Max. 6PCS Warranty 1 year 2:DMX Operation International standard control signal: DMX 512 The device uses two channels (channel 1: control preheat and emergency stop channel2:...
Operation panel READY:Green light Flash indicates that the system is ready for work, and the steady light indicates that the system could work now DMX: Blue light Flash indicates DMX signal, while no display is signal disconnected FAULT: Yellow light It is on when there is an error HEAT:...
Page 5
1: Short press the red button, when the display shows”FFF”,it means the machine has connected to remote control,long press the red button,when the display shows“OFF”,it means the machine has disconnected from the remote control. 2:”ON”button : turn on pre-heat,”OFF”button: turn off pre-heat 3:”1/2/3”button: working height, ”1”=F1;...
4:DMX Channel mode The system occupies 2 channels The First Chanel Function Digital Tube Display 0-10 Pre-heat turn off 11-239 Emergency stop 221-239 Pre-heat turn on 240-255 Pre-heat ON Temperature DMX address The Second Chanel Function 0-15 Turn off 16-95 Spark Height 1 96-175 Spark Height 2...
6:Consumables considerations 1) If the consumables are accidentally ignited, they can only be covered with sand, and the air is isolated until it is extinguished. Do not use water. 2) Consumables should be kept in a dry and sealed environment to prevent moisture。 3) The consumables are classified as: Small consumables: the spray height is 1.0-3.0 m (error 0.5 m), and the spattering point is not...
Page 8
8:Warning and safety matters Do not spray more than 30 seconds each time. If the continuous spraying time is too long, the internal temperature will rise sharply and cause permanent damage. After a single long-time spray, you should pay attention to the next spray after a short pause. When the machine continues to spray for more than 30 seconds, it will automatically close.