Instruction manual
Remote control
01
02
03
04
05
06
07
1. REPEAT button
2. STANDBY button
3. LIGHT button
4. EQ/SAVE button
5. PLAY/PAUSE button
6. VOL+ button
7. VOL- button
8. FM/SCAN button
9. MODE button
10. PREVIOUS button
11. NEXT button
12. Number buttons
Important safeguards
• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer to the
manual. Keep the manual for future use.
• Do not hit or drop the unit
• Do not expose the unit to vibration, direct
sunlight, too high or low temperatures or
humidity.
• Do not disassemble the unit yourselves
Refer servicing to qualified service personnel
All the illustrations in this manual are
schematic images, which may differ from
actual objects.
3
08
FM
REPEAT
SCAN
EQ/
09
LIGHT
MODE
SAVE
10
11
12
Power supply
Charger
• Plug the supplied charger into the micro
USB port on the back of the unit. Connect
the power cord to a household mains outlet.
The LED indicator will light red, meaning the
charging is in process. After 4-6 hours the
indicator will turn green, meaning the battery
is fully charged.
• Always remember to disconnect the power
cord from the mains before disconnecting it
from the unit.
• Disconnect the power cord from the mains
when not in use.
General operations
Turning On and Off
• Press and hold the STANDBY button to turn
the unit on. Press and hold this button to turn the
unit off.
Backlight brightness
• By default, the LED display backlight is set
to the max level. Press the LIGHT button
on the remote to choose one of the 3
brightness levels.
Mode selection
• Press the MODE button to select the
operation mode. The mode cycle is as follows:
CLOCK/USB/SD/AUX/FM/BLUETOOTH.
Setting the clock
• Press and hold the STANDBY button
to power on the device. The unit will
enter the clock mode.
• Press and hold the MODE button.
The year digits will flash. Rotate the volume
knob to adjust the year setting.
• Press the MODE button again.
The month digits will flash. Rotate the volume
knob to adjust the month setting.
• Press the MODE button again and
repeat the above procedure to set the day, hour
and minute values.