Playback Operations - Telefunken TF-1582UB Instruction Manual

Instruction manual

Playback operations

• During playback press
playback. Press this button again to resume
playback.
• During playback press
to go to previous or next track. Press and
hold the or
increase volume. Pressing and holding the
or buttons on the RC will scan the track
backwards or forwards.
• To adjust volume on the RC, press the
VOL+/- buttons.
• Press EQ/SAVE on the RC to select
among various sound modes: NORMAL/
ROCK/POP/CLASS/JAZZ/BASS.
• Press the REPEAT button on the RC to
choose between repeat all mode (ALL will
appear on display), random playback (RAND)
and repeat single track (SING). Press
REPEAT longer time to start repeating folder,
then "P-A" to be displayed, on screen "P—A"
is displayed, and that means has chosen this
time as for start repeating folder (this time the
speaker continues playing), repress REPEAT
longer time, "P---b" will be displayed on
screen, that means has chosen this time to
be the end
of repeating folder, then the unit will repeat
playing music from the chosen folder.
If want to cancel the repeat folder, repress
the key REPEAT longer time and then "P---E"
to be displayed on screen, then the repeating
folder is cancelled. Pressing REPEAT fast or
switching to other music also can cancel the
repeat folder.
• Press the number buttons on the RC to
choose the number of the track you wish to
play.
• In playback mode, press MODE to
switch off the player and go to radio/bluetooth
mode.
5
button to pause
or buttons
buttons to decrease or
General USB/microSD/TF notes
• This unit is equipped with a USB socket
that can accept and play MP3 files stored on
standard USB flash (compatible with USB
version 2.0) up to 32 GB.
• This unit is also equipped with a
microSD/TF card socket that can accept and
play MP3 files stored on standard microSD/
TF cards up to 32GB.
Always switch off the unit or change
mode to another one before removing a USB
flash drive or microSD/TF card, to prevent
damage to your USB device or memory card.
Note: Although this product is fully
compatible with USB 2.0 and microSD/TF
card standard formats, a small percentage of
USB flash drives and cards might not be
readable, due to those device manufacturers'
non-compliance with the full (official) USB and
microSD/TF card standards.
• FAT32 file system is supported by USB
and microSD/TF of this unit.
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warranty cases.
Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.