Monogram ZWL1126SJ Installation Instructions Manual page 7

24" Flush Mount Deflector Vent
2. Install deflector as shown in
Figures 10 and 11
Shelf detail showing the deflector vent during
installation. Position deflector vent and mark
holes. Pre drill using a 1/16" bit before mounting.
Figure 10
Shelf detail showing the deflector vent installed.
Figure 11
3. Place the drawer adjacent to the wall or
cabinet. Plug the power supply cord into the
electrical outlet.
4. Carefully guide the drawer into the prepared
opening. Avoid contact with the sides of the
cutout opening and also pinching the cord
between the oven and the wall.
5. Slide the drawer all the way back until the
mounting flanges touch the cleats in the cabinet
opening.
1" = 2.5 cm; 1' = 0.3 m
Installation Instructions
6. Open the drawer. Using the 4 holes on the
drawer as a template, pre drill the cabinet using
a 1/16" bit. See Figure 12.
Figure 12
7. Secure the drawer with the 4 screws supplied.
7
Mounting
Flange