App Operating Instruction; Recording With App; Real-Time Translation; Settings - Philips VTR5103 User Manual

4 APP Operating Instruction

4.1 Recording with APP

Once the Voice Recorder connected to the APP, you can
control the recording with the APP. Specific operations refer
to the Recording section in "Recording with APP".

4.2 Real-time translation

After connecting to the APP, select "Real-time Translation"
to enter translation interface. Tap "Real-time Translation"
button (Set the target language as needed before tapping
the button). After prompted to be sent successfully, current
speech can be recognized and translated instantly, and the
translation can be edited, saved and shared.
22 EN
Note
1. During real-time translation, focus the sound source on
the microphone, and do not cover the Mic head with your
hand, so as to avoid to affect the recognition effect;
2. During real-time translation, do not exceed the effective
recognition distance;
3. During real-time translation, the recognition effect will be
affected if obstacles exist.

4.3 Settings

In the recording interface, tap "Settings" in the upper right,
to set Recording scene, Indicator, Playback mode, Backlight,
Time calibration, Capacity (remaining/total), APP interface
introduction, Check for updates, About, Disconnect the
device, etc.
Reminder
• If you need to disconnect with the APP, just select
"Disconnect the device" in the Settings to disconnect. To
avoid exceptions, you cannot close the APP directly.