Page 1
RedLine 50/100 Operations Manual Welcome to the RedPlate Family, thank you for your purchase of a RedPlate RedLine amplifier. Please take a moment and review this manual for an understanding of all the available features (or just put all the knobs at noon and play).
Page 2
RedPlate RedLine Operations Guide Input Jack – Typical High impedance input to the amplifier. Designed to be “Pedal Friendly”. Volume – Typical setting is between 10 and 1 o’clock but experimentation is encouraged. Gain – Typical setting is between 10 and 1 o’clock but experimentation is encouraged.
Page 3
RedPlate RedLine Operations Guide The RedLine comes complete with a footswitch: FOOTSWITCH MASTER – Light on = Master1 control is active, Light off = Master2 control is active. POWER ON/OFF PROCEDURE 1. Check the Standby switch to make sure it is toggled downward for Standby operation.
Page 4
At RedPlateAmps we pride ourselves making products that are built to last. The workmanship in your RedPlate amplifier is warranted to be problem free for the lifetime of the original owner. The actual electrical components in your amplifier are warranted for a period of 3 years.