Page 1
WAT10W Water Bottle Filtration System OWNERS MANUAL Read and save these instructions.
Page 2
Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
While cleaning, please keep the filter core sealing gasket properly attached. Failure to do so may cause water leakage and thus affect water quality. When replacing the filter core, we recommend rising out the entire water filtration system. http://www.NewAir.com...
FILLING THE FILTRATION SYSTEM Remove the top cover. Pour cold tap water into the upper barrel. (For best results, always use “COLD” tap water) NEVER USE HOT WATER! NEVER REMOVE THE WATER http://www.NewAir.com...
FILTRATION SYSTEM TO FILL THE UPPER BARREL. ALWAYS USE A PITCHER TO FILL. Use the guide on the face of the lower barrel to ensure you don’t overfill. Replace the top cover. CLEANING & MAINTENANCE Please follow the instructions below in order to clean the filter core: Immerse the filter core in the sink for about 7-8 mins, as shown in Fig.
There is no water The water level in the Add water to the upper flow. upper barrel may be barrel. too low. Air may be blocking the Pat the upper barrel to water flow. remove any trapped air. http://www.NewAir.com...
When making a warranty claim, please have the original bill of purchase with purchase date available. Once confirmed that your appliance is eligible for warranty service, all repairs will be performed by a NewAir™ authorized repair facility. The purchaser will be responsible for any removal or transportation costs.