V&A 8320 User Manual
  1. Manuals
  2. Brands
  3. V&A Manuals
  4. Multimeter
  5. 8320
  6. User manual

V&A 8320 User Manual

Pocket multimeter
Hide thumbs
1
2
3
4
5

Advertisement

Table of Contents

Pocket Multimeter M320
USER'S MANUAL
SAFETY INFORMATION
Measurement category II is for the measurements performed on
circuits directly connected to the low voltage installation. This meter has
been designed according to IEC-1010 concerning electronic measuring
instruments with an overvoltage category (CAT II) and pollution degree
2.
Follow all safety and operating instructions to ensure the meter is
used safely and is kept in good condition.
With proper use and care, your digital multimeter will give you years
of satisfactory service.
DURING USE
 Never exceed the protection limit indicated in the specifications for
each range of measurement.
 Never use the meter to measure voltages that might exceed 600V
above earth ground in category II installations.
 Always be careful when working with voltages above 60V dc or 30V
ac rms. Keep fingers behind the probe barriers while measuring.
 Do not perform resistance measurements on live circuits.
 Inspect test leads and probes for cracks, breaks or crazes in the
insulation before using the meter.
SAFETY SYMBOL
Caution: refer to the instruction manual. Incorrect use
may result in damage to the device or its components.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8320 and is the answer not in the manual?

Questions and answers

Related Manuals for V&A 8320

Summary of Contents for V&A 8320

  • Page 1 SAFETY INFORMATION Pocket Multimeter M320 Measurement category II is for the measurements performed on circuits directly connected to the low voltage installation. This meter has been designed according to IEC-1010 concerning electronic measuring instruments with an overvoltage category (CAT II) and pollution degree USER’S MANUAL Follow all safety and operating instructions to ensure the meter is used safely and is kept in good condition.

  • Page 2: General Description

    AC (Alternating Current) Least Significant Digits) DC (Direct Current) Voltage AC or DC Function Range Resolution Accuracy Earth ground ±(1.0% of rdg DC Millivolt. 400mV 0.1mV +10 digits) Double insulated Fuse ±(0.5% of rdg +3 DC Voltage 10mV Conforms to European Union directives digits) 400V 100mV...
  • Page 3 ±(0.5% of rdg+3 digits) 400.0 0.1 50 4.000k 1 Overload protection: 600V dc or 600V ac rms. 40.00k 10 Test Condition: Open circuit voltage: approx. 0.5V Resistance ±(0.5% of rdg+2 digits)  400.0k 100 WITH AUTO POWER OFF FUNCTION 4.000M 1k...

  • Page 4: Key Function

    OPERATING INSTRUCTION Diode Test Voltage Measurement 1. Set the rotary switch to range. 1. Set rotary switch to the V range. 2. For forward-bias readings on any semiconductor component, place 2. Press the SELECT key to select DCV or ACV measuring mode. the red test lead on the component's anode and place the black test 3.

  • Page 5: Battery And Fuse Replacement

    The Meter enters the "sleep mode" and blanks the display if the Meter is ACCESSORIES 1.5V (SR44) on but not used for 30 minutes. Battery Press the HOLD key or rotate the rotary switch to wake the meter up. Carrying Case >>>6 7<<<...

This manual is also suitable for:

M320

Table of Contents