Related Manuals for Wiedenmann TERRA SLIT
Summary of Contents for Wiedenmann TERRA SLIT
- Page 1 Translation of original Operating Instructions Deep Aerator TERRA SLIT 499.001 From equipment I.D. No. : Status : January 2010 499 99 01...
- Page 2 All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of publication. We reserve the right to make design changes at any time without prior notification.
- Page 3 All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of publication. We reserve the right to make design changes at any time without prior notification.
- Page 4 Preface READ THESE OPERATING INSTRUCTIONS CAREFULLY to familiarise yourself with the correct way to operate and service your machine, and to prevent personal injury or damage to the machine. These operating instructions and the adhesive safety signs on your machine can also be obtained in other languages (your dealer can order these for you).
-
Page 5: Table Of Contents
Adjusting the rear roller........34 7.0. Operation............35-37 7.1. General Information........35 7.2. Driving characteristics........36 7.3. Working with the TERRA SLIT........ 36 7.4. Driving characteristics........37 8.0. Maintenance............38-46 8.1. General Information........38 8.2. Maintenance and inspection list......39 8.3. -
Page 6: Safety Measures
1.0. Safety Measures RECOGNISE WARNING SYMBOLS This symbol draws your attention to the safety instructions attached to the machine or contained in these operating instructions. It means that there is a risk of injury. Follow all recommended safety instructions as well as the accident prevention regulations. - Page 7 1.0. Safety Measures OBSERVE THE ROAD TRAFFIC REGULATIONS Always observe local road traffic regulations when using public roads. WEAR PROTECTIVE CLOTHING Wear close-fitting clothing and the appropriate safety equipment for the work at hand. Prolonged exposure to loud noise can result in impairment or loss of hearing.
- Page 8 1.0. Safety Measures SAFETY AND PROTECTIVE DEVICES Safety and protective devices must be kept in proper working order and be fitted to the relevant location. Always disengage the drive sections and shut off the engine before removing any of the safety and protective devices. Keep hands, feet and clothing away from moving parts.
- Page 9 1.0. Safety Measures USE SAFETY LIGHTS AND EQUIPMENT Avoid collisions with other road users. Slow moving tractors with mounted or towed equipment, and self-propelled machines on public roads pose a specific danger. Frequently check for traffic coming behind you, especially when making turns.
- Page 10 1.0. Safety Measures REMOVE PAINT BEFORE WELDING OR HEATING PARTS Welding should only be carried out by persons with a relevant qualifying certificate i.a.w. EN287. Avoid the formation of toxic fumes and dust. Hazardous fumes can be generated when paint is heated due to welding, soldering, or using a welding torch.
-
Page 11: Adhesive Safety Signs
1.0. Safety Measures 1.1. Adhesive Safety Signs Warning symbols Warning signs serving to draw your attention to dangers are attached to the machine at several important positions. The hazard is identified via a warning triangle. A second symbol informs you how the injury can be prevented by acting appropriately. - Page 12 1.0. Safety Measures 1.1. Adhesive Safety Signs Protective cover Protective cover prevents access to tools. The protective cover is secured on both sides for safeguarding. 499.03 Parking safeguard Before placing the machine on the ground, the ball cock on both hydraulic cylinders must be locked to prevent lowering.
- Page 13 Do not operate the machine when children and others are nearby. d) Do not allow untrained personnel to operate the machine. ATTENTION DANGER ! Never use the TERRA SLIT without safety equipment. Otherwise, you expose yourself and others to extreme danger.
-
Page 14: Safety Instructions
1.0. Safety Measures 1.3. Safety instructions • In addition to the information provided in these Operating Instructions, please also observe generally applicable safety and accident- prevention standards ! • Familiarise yourself with all equipment and operating elements and their functions before starting work. -
Page 15: Assembly
2.0. Assembly 2.1. General Information Place the TERRA SLIT on the ground with parking supports in topmost position. For this work, please use your personal protective equipment (PSA) such as: gloves, goggles, ear protectors. If, instead of Wiedenmann additional weights, any random... -
Page 16: Mounting Knives
2.0. Assembly 2.2. Mounting knives Knives can be mounted in two ways : 1. 150 mm division for 40 knives 2. 75 mm division for 76 knives The correct position for standard knives The correct position for power knives The correct position for fine- cut knives All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of publication. -
Page 17: Installing Hollow Tines And Half Discs
2.0. Assembly 2.3. Installing hollow tines and half discs Version 1: 8 spoons are mounted per half set of discs Version 1: 8 spoons are mounted per half set of discs Discs are always attached to the same side. No more than ten half sets of discs may be fitted with hollow spoons. -
Page 18: Installing Cutting Blades And Half Discs
2.0. Assembly 2.4. Installing cutting blades and half discs 8 cutting blades are mounted per set of half discs Version 1: 10 sets of half discs are attached to every second disc This corresponds to: division = 150 mm Version 2: 19 sets of half discs are attached to every disc This corresponds to:... -
Page 19: Mounting Additional Weight
2.0. Assembly 2.5. Mounting additional weight ATTENTION ! Switch off the tractor and Only carry out mounting work secure it against when the machine is connected. unintentional start up. Lower the connected machine onto the ground. Attach retainers (A) manually on both sides of the ballast frame. -
Page 20: Attaching Rear Roller
2.0. Assembly 2.7. Attaching rear roller Installation without auxiliary devices requires 2 persons. Installation load is 22 kg. Align bore (A) of side arms with bore (B) on frame. Insert bolts on both sides and secure with spring cotter. Insert bolts on both sides and secure with spring cotter. -
Page 21: Mounting The Chassis With Drawbar
2.0. Assembly 2.8. Mounting the chassis with drawbar Installation without auxiliary devices requires 2 persons. Installation load is 25 kg. Hang basic unit on points (A and B) . Attach cylinder bearing (C) to frame in the correct hole pattern on both sides. Knock out clamping sleeve on the two parking supports. - Page 22 2.0. Assembly 2.8. Mounting the chassis with drawbar Attach drawbar (J) to the topmost bores of the inner attachment brackets, ensuring that the drawbar is movable. Insert upper guide bar (K) into the topmost bore and secure. Attach retainer (L) to frame with screw (M).
-
Page 23: Transport
• Never stand under lifted loads. There is an imminent danger to life if the load falls. Improper transport and mounting of TERRA SLIT can result in: • injury to persons • damage to property. Pay special attention to the... -
Page 24: Transporting Terra Slit
Risk of injury due to ends “springing open”. 3.2.1. Transport Using a Forklift If the TERRA SLIT is still secured to the transport frame: • Insert the forks under the transport frame (pay attention to the direction of approach), •... - Page 25 2.0. Transport 3.2. Transporting the TERRA SLIT 3.2.3. Mounting point for transport on a trailer CAUTION DANGER : Please note the removal instructions in Chapter 5.2. - DANGER OF TOPPLING! Tighten tie-down straps evenly, alternating diagonally across. • Hooking points for straps...
-
Page 26: Transportation With Three-Point Hitch
When driving on public roads, please observe the swivel range of the attached TERRA SLIT. 3.4. Transportation with drawgear Lower the chassis of the attached device hydraulically to the stop by pressing downwards and secure against accidental lowering. -
Page 27: Connecting To The Tractor
Always pay attention to: • The load of the lower guide bar connection. Only attach the TERRA SLIT if: • When the engine is switched off, • and the PTO shaft is stationary. 4.2. Ballast When mounting equipment at the rear, always ensure there is sufficient front axle load;... -
Page 28: Connecting To The Tractor
4.0. Connecting to the Tractor 4.3. Connecting to the tractor Prerequisite for connecting: • a three-point hitch. NOTE : With the three-point linkage it is essential that the assembly categories of the tractor and machine match each other. Connection procedure: 1. -
Page 29: Hitching To The Tractor
4.0. Connecting to the Tractor 4.4. Hitching to the tractor The following is required for attaching the machine: • An adjustable drawbar or a trailer hook coupling. • Hydraulic connection on the rear of the tractor If your tractor is not equipped with such a socket, please contact your dealer. - Page 30 5.0. Disconnecting from the Tractor 5.1. General Information This ensures the TERRA SLIT is Only set the TERRA SLIT down: securely positioned • on a firm, stable and even surface The tools will not be damaged • if parking supports are fully lowered.
-
Page 31: Disconnecting From The Tractor
5.0. Disconnecting from the Tractor 5.3. Disconnecting the TERRA SLIT Lower the chassis of the attached device hydraulically to the stop. Move ball cock to the "OFF" position to safeguard the device against accidental lowering. Relieve hydraulic pressure in the lines. -
Page 32: Before Initial Operation
6.0. Before initial operation 6.1. General Information CAUTION DANGER : It is important to become familiar with all equipment and operating elements as well as their function before operating the machine. Make sure that all protective devices have been properly mounted. It will be too late for this during operation! In addition to the information... -
Page 33: Displays And Adjustment Elements
6.0. Before initial operation 6.2. Displays and adjustment elements Ball cock located on both hydraulic cylinders to keep chassis in position during transportation and maintenance. Position: “OPEN“ Position: “OPEN“ Upper guide bar going from the drawbar to the frame of the basic unit. -
Page 34: Adjusting The Terra Slit
6.0. Before initial operation 6.3. Adjusting the TERRA SLIT Lower Terra Slit into working position on a level surface. Adjust the upper guide bar so that the upper edge of the frame is parallel to the ground. 6.4. Adjusting the rear roller... -
Page 35: Operation
7.0. Operation 7.1. General Information ATTENTION: The TERRA SLIT operator is responsible for persons located inside the working area. Never operate the TERRA SLIT without its safety devices. If you do operate the TERRA SLIT without safety devices, you expose yourself and others to extreme danger. -
Page 36: Driving Characteristics
7.0. Operation 7.2. Driving characteristics CAUTION ! • When the TERRA SLIT has been installed, this may have an influence on the driving and operational qualities of the tractor. • Always adapt your driving style to match the terrain and ground conditions. -
Page 37: Driving Characteristics
7.0. Operation 7.4. Malfunctions and troubleshooting Description Cause Remedy Place additional weights onto support frame Machine is rocking from left Soil is too dry, or too The overall permissible to right compact weight must be observed when adding extra ballast Treat the area twice Stony ground Reduce the working depth... -
Page 38: Maintenance
8.1. General Information CAUTION DANGER : Only qualified personnel are After maintenance, remove all parts not belonging to the permitted to perform TERRA SLIT. Then reinstall maintenance, repair and all safety covers/guards. disassembly tasks. (See Section ” Safety Only perform maintenance work Equipment”... -
Page 39: Maintenance And Inspection List
8.0 Maintenance 8.2. Maintenance and inspection list Working Check Procedure hours Flange bearing for Lubricate loosening rotor Vertical bearing for Lubricate trailing roller All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of publication. -
Page 40: Lubrication
8.0 Maintenance 8.3. Lubrication • Only carry out maintenance • Clean up leaking grease. work when machine is connected. Turn off the • Before starting the machine tractor and secure it against being after a longer standstill, unintentionally switched on. lubricate and maintain the entire machine •... -
Page 41: Cleaning Terra Slit
8.0 Maintenance 8.4. Cleaning the Terra Slit Clean the TERRA SLIT regularly. You will prolong the service life of expensive components and simultaneously detect: • Loose components • Damaged cables or lines • Wear and unintended collision points. NOTE: Do not bring plastic and sealing elements in contact with aggressive fluids (e.g. -
Page 42: Care And Maintenance Of The Hydraulic System
8.0 Maintenance 8.5. Care and maintenance of the hydraulic system Suitable for hydraulic fluids based on mineral, glycol and synthetic oils. Examine hydraulic hose lines regularly for damage and ageing and replace if necessary. According to the manufacturer's specifications, the replacement period for hydraulic lines is 6 years. -
Page 43: Hydraulic Connection Diagram
8.0 Maintenance 8.6. Hydraulic connection diagram 499.57 All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of publication. We reserve the right to make design changes at any time without prior notification. -
Page 44: Wheels And Tyres
8.0. Maintenance 8.7. Wheels and Tyres Regularly check the tyre pressure: 250 kPa CAUTION: Serious or fatal injuries can be caused by the explosion-type bursting of the tyres and by the rim parts. Only carry out tyre installation if you have appropriate experience and equipment. -
Page 45: Disassembly / Disposal
Heavy parts might fall down after being disconnected sharp edges, The machine might tilt and crush someone. Disassembly for disposal : 1. Set the TERRA SLIT down on stable ground. 2. Drain hydraulic oil. 3. Disassemble TERRA SLIT from the top downwards. IMPORTANT... -
Page 46: Unauthorised Modification And Spare Part Manufacturing
8.0. Maintenance 8.9. Unauthorised modification and spare part manufacturing • Conversions or modifications to TERRA SLIT are only authorised with the agreement of the manufacturer! • Original spare parts and accessories authorised by the manufacturer guarantee your safety. The use of other... -
Page 47: Additional Equipment
9.0. Additional Equipment 9.1. Scope of Delivery Basic unit for three-point installation using a tool roll Operating instructions, transfer declaration with guarantee card. 9.2. Permissible equipment combinations Three-point version Basic unit Standard knives Power knives Roller blade Hollow tines Set of half discs 1 to 3 additional weights Trailing roller Hydraulic weight transfer unit... -
Page 48: Tools
9.0. Additional Equipment 9.3. Tools 75 mm 150 mm division division Number Standard knives Max. working depth 200 mm Slotted rows per working width Number Power knives Max. working depth 200 mm Slotted rows per working width Number Fine-cut knives Max. -
Page 49: Special Equipment
9.0. Additional Equipment 9.4. Special equipment Three-point Trailer TERRA SLIT version version Standard knives Standard knives Fine-cut knives Roller blade Hollow tines Set of half discs One additional weight compl. Two additional weights compl. Three additional weights compl. Chassis with drawbar... -
Page 50: Technical Specifications
Trailing roller Hydraulic weight transfer unit Permissible additional weight on ballast frame Overall permissible weight of the TERRA SLIT 1000 The sounds are drowned by the tractor's engine. All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of... - Page 51 10.0. Technical Specifications 10.1.1. Technical Data Three-point version: 499.53 All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of publication. We reserve the right to make design changes at any time without prior notification.
- Page 52 ………………………………..3 Trailing roller Permissible additional weight on ballast frame Overall permissible weight of the TERRA SLIT 1000 The sounds are drowned by the tractor's engine. All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of...
- Page 53 10.0. Technical Specifications 10.1.2. Technical Data Trailer version: 499.54 All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of publication. We reserve the right to make design changes at any time without prior notification.
- Page 54 10.0. Technical Specifications 10.2. Metric bolt and cap screw torque values Quality class and head markings Quality class and head markings Quality class 4.8 Quality class 8.8 or 9.8 Quality class 10.9 Quality class 12.9 Size Lubricated * Dry ** Lubricated * Dry ** Lubricated *...
- Page 55 10.0. Technical Specifications 10.3. Chassis Number Enter the respective product identification no. in the space provided below. The number is required when ordering spare parts or making warranty claims. 499.55 Product Id. Number ....All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of publication.
Need help?
Do you have a question about the TERRA SLIT and is the answer not in the manual?
Questions and answers