Advertisement
OPERATION
Control panel
1.
Long press the up/down buttons to adjust the height of the desk; the screen will
show "bot" when the desktop runs to its lowest point and "top" when the desktop
runs to its highest point.
2.
1, 2, 3, 4 are the four height memory keys; press and hold the desired button for 3s
to save the current desk height to the relevant key.
3.
Press the 3 and 4 buttons simultaneously; the screen will display RST direction.
Continue holding the 3 and 4 buttons to factory reset the unit.
4.
The desk has two USB ports and one USB type-C port; these can supply power to
other electronics. Each channel has a maximum output of DC 5V/2.4A power
when the desktop is stationary, and power output will stop when the desktop is
running. The unit will resume power output after 5s of inactivity.
5.
Short press the "LOCK" button to enable the child lock function to avoid
accidental adjustment and guarantee the safety of children. The screen will show
"Loc" when the desk is locked; short press the "LOCK" button again to unlock the
desk.
6.
Press and hold the up and down button simultaneously to adjust the sensitivity of
the anti-collision function. The anti-collision function will be disabled when the
screen shows "L-0", and the sensitivity can be set between levels 1-3 from least to
most sensitive, with the screen showing "L-1" to "L-3" accordingly.
LED Screen
Advertisement
