Table of Contents
Advertisement
MAX MIN DIF AVG display
MAX= maximum . Maximum value of measurement.
MIN= minimum. Minimum value of measurement.
DIF= difference. Difference value of measurement.
AVG= average.
Adjustable display by pressing up/down button.
Data Logger
1. Storing Data
Your thermometer is capable of storing up to 100 data
locations.
2. Storing Infrared Data
To store data from an infrared reading, pull the trigger. While
holding the trigger, press the MODE button until LOG
appears in the lower left corner of the display screen; a log
location number will be shown above. If no temperature has
been recorded in the shown LOG location, 4 dashes will
appear in the lower right corner. Aim the unit at the target
area you want to record, and press the laser/backlight button.
The recorded temperature will appear in the lower right
corner. To select another log location, press the up and down
keys.
3.Recalling Data
To recall stored data after the unit shuts off, Press the trigger ,
then press the MODE button until LOG appears in the lower
left corner. A LOG location number will be shown above LOG,
and the stored temperature for that location will be displayed.
Press the UP and Down keys, to move to another LOG
Average value of measurement.
10
Advertisement
Table of Contents
