Advertisement
Available languages
Available languages
Quick Links
Firewire Card IEEE 1394
Article number 38-2384 • Model BL-1394-1A
Please read the entire instruction manual before using and save it for future use. We apologise for
any text or photo errors and any changes of technical data. If you have any questions concerning
technical problems please contact our Customer Service Department.
Product Description
•
Firewire Card (IEEE 1394) with rapid
transfer, up to 400 Mbps.
•
Suitable for video camera with DV con-
nection, external hard drive, digital camera,
etc.
•
Simple Plug-and Play installation
•
4x ports (2+1 outer + 1 internal)
•
For Windows 98 SE or later
Contents
•
Firewire Card IEEE 1394
•
Firewire cable
System requirements
Operating system Windows 98SE* or later,
vacant PCI port. At installation under Windows
98SE, the installation disc for Windows 98SE
is needed.
Install PCI card
Note!
When the PCI card is being installed, it is very
important that the computer is shut off. Com-
puter components are very sensitive for static
electricity, use the antistatic bag which the prod-
uct is delivered in for storing the components,
and use a antistatic wristband at installation.
Follow these instructions if you do not have
an antistatic wristband: Divert your antistatic
charge by holding the computer chassis right
before and during the time you handle the card.
1. Shut off the computer and all connected
devices and pull out the plug to the com-
puter.
2. Split the computer box and make the mot-
herboard accessible. Install the PCI card in
an open PCI port on the motherboard.
GREAT BRITAIN For consumer contact, please visit www.clasohlson.
co.uk and click on customer service.
ENGLISH
3. Do not press the PCI card too hard while
installing since the motherboard can be
damaged.
4. Lock the card with a screw or another type
of locking. The PCI card shall be pushed
in equally far through the entire row when
properly installed.
Installation
Note! The following example is for Windows
XP with SP2. No extra driver is needed, install
the card and start the computer. You can
check that the card is installed by going to:
"Click on Start/Settings/Control panel/Sys-
tem/Computer hardware/device manager."
The card is displayed as "VIA OHCI compat-
ible." Under "IEEE 1394 controller card".
Disposal
Follow local ordinances when disposing of
this product. If you are unsure about how to
dispose of this product contact your munici-
pality.
Advertisement
Related Manuals for Clas Ohlson BL-1394-1A
Summary of Contents for Clas Ohlson BL-1394-1A
- Page 1 ENGLISH Firewire Card IEEE 1394 Article number 38-2384 • Model BL-1394-1A Please read the entire instruction manual before using and save it for future use. We apologise for any text or photo errors and any changes of technical data. If you have any questions concerning technical problems please contact our Customer Service Department.
- Page 2 SVENSKA Firewirekort IEEE 1394 PCI Artikelnummer 38-2384 • Modell BL-1394-1A Läs igenom hela bruksanvisningen före användning och spara den sedan för framtida bruk. Vi reserverar oss för ev. text- och bildfel samt ändringar av tekniska data. Vid tekniska problem eller andra frågor, kontakta vår kundtjänst.
- Page 3 NORSK Firewirekort IEEE 1394 PCI Artikkelnummer 38-2384 • Modell BL-1394-1A Les nøye igjennom hele bruksanvisningen og ta vare på den til senere bruk. Vi reserverer oss mot ev. tekst- og bildefeil, samt forandringer av tekniske data. Ved tekniske problemer eller andre spørsmål, ta kontakt med vårt kundesenter.
- Page 4 SUOMI Firewire ohjain IEEE 1394 PCI Tuotenumero 38-2384 • Malli BL-1394-1A Lue käyttöohjeet ennen tuotteen käyttöönottoa. Säilytä käyttöohjeet tulevaa tarvetta varten. Pidätämme oikeuden teknisten tietojen muutoksiin. Emme vastaa mahdollisista teksti- tai kuva- virheistä. Jos laitteeseen tulee teknisiä ongelmia, ota yhteys myymälään tai asiakaspalveluun.