Keep the top cover closed to avoid dust and other particles from entering the inside of the device. If the device is not functioning properly, please contact the dealer you purchased this product from or Canon Service & Support at www.usa.canon.com/support Never expose the battery to high temperatures, direct heat, or dispose by incineration.
GETTING STARTED CHARGING Charging Status LED Charging : Red Full : Green The device has a built-in battery. Please fully charge the device via the USB cable provided before using. 1. Insert the smaller end of the supplied USB cable into the device and other end into a chargeable USB adapter.
OPERATION POWER ON/OFF 1. Press and hold the Power Button unit the LED indicator light turns on. 2. When the LED indicator turns to a steady white, the device is ready to use. 3. Press and hold the Power Button to turn off the device.
LED INDICATIONS Status Operation LED Indicator Power On Press and hold Power Button Standby After the device is powered on Power Off Press and hold Power Button When the device detects wrong SMART SHEET Error SMART SHEET is inserted, or other SMART SHEET error When the device is printing out...
Page 6
Low Battery When battery level down to 20% Very Low Battery When battery level is very log When the device is updating Firmware Updating firmware When the device is taking a photo Selfie Photo in Selfie Mode (Ring Light)
Approximately 50 seconds – Motor starts and stops, at room temperature 77 F (25 C) Photo Aspect Ratio 2” x 3” Compatible Paper Canon ZINK® Photo ZP-2030-20 (20 sheets) Paper : ZP-2030-50 (50 sheets) 2” x 3” / Peel-and-Stick Back Paper Capacity Up to 10 sheets of ZINK®...
Need help?
Do you have a question about the ZV-223 and is the answer not in the manual?
Questions and answers