Table of Contents
Advertisement
14 (red)
15 (white/blue)
AC POWER INPUT: Molex Minifit MF-6F type
PIN (color)
1, 4
2, 5
3, 6
OUTPUT POSITIVE AND OUTPUT NEGATIVE:
M6 thread (8mm thread depth)
PIN (color)
DIODE "+" (red)
DIODE "–" (black)
GROUND: M5 stud
Module should be grounded using this stud.
Grounding should be done before powering the system.
By default OUTPUT POSITIVE and OUTPUT NEGATIVE
are isolated from the chassis' ground (i.e. output is floating).
Modifications with grounded anode or grounded cathode
+15V DC
Auxiliary +15V DC output.
AUXILIARY
Maximum output current 50mA.
OUTPUT
INTERFACE
Return of other Interface signals (namely
RETURN
Fault, Current program and +15V DC)
DESCRIPTION
Pins 1 and 4 are interconnected inside the module
Not used
Pins 3 and 6 are interconnected inside the module
DESCRIPTION
To laser diode anode
To laser diode cathode
Grounding policy
are available upon request.
6
Advertisement
Table of Contents
