Summary of Contents for ducduc STUDIO DUC JUNO PLAYTABLE
Page 1
ASSEMBLY INSTRUCTIONS juno playtable a how-to guide that won’t leave you in tears...
Page 2
parenting is hard. this is easy. no really, it is. MADE HERE™ MADE WELL™ MADE SAFE MADE SMART...
Page 3
want to watch this assembly IRL? (acronym challenged? that means “in real life”.) open the camera on your phone and place it over the QR code below to see our NYC studio dream team do all the heavy lifting (just kidding, there is none!) or go to ducducnyc.com/assembly-instructions...
Page 4
thank you for selecting a studio duc product!
Also, please ensure there was no damage that may have occurred in shipping. If any components are missing or you find any damage, please contact ducduc before continuing. Read all the instructions before use. MAINTENANCE: Please remember to securely tighten all connectors, and periodically check to make sure every component is properly and securely in place.
Page 6
WHAT’S IN THE BOX: A (x2) side center stretcher hammer cap INCLUDED WITH PLAYSTOOL PURCHASE ONLY: E (x8) F (x4) G (x4) side seat stretcher...
Page 7
WHAT YOU’LL NEED: household hammer 10 minutes (or less) 2 people + a dog for moral support (unless you’re a cat person)
Page 8
Lean A against the wall. *duc insider tip* Steps in this assembly will require parts to be flat on the floor. Assemble on a soft surface to prevent any damage. Try a rug, a blanket, or even a sheet of foam from the packaging! Insert B connectors into slots on A.
Page 9
Push B down to lock connectors into place. Insert connector on C into remaining slot on A.
Page 10
Gently push C toward B so the connectors line up with the holes. *important note* Make sure NOT to push C in all the way. Have a friend hold C in place while you prepare for the next step. If C is not held in place, it can drop to the floor + splinter the connection.
Page 11
Insert connectors on B + C into the slots of remaining part A. *duc insider tip* This is a bit of a balancing trick- but don’t stress! We find it easiest to line up C’s connectors with A’s slot first. Once that is in place, then line up B’s connectors with A’s slots!
Page 12
Push B down to lock connectors into place.
Page 13
Flip the playtable so the legs are facing up as shown. Apply the hammer cap (D) to the end of your own hammer. Tap C with the protected hammer until there is no gap at the seam to secure into place. *duc insider tip* Don’t be afraid to apply a good amount of force when hammering the stretchers...
Page 14
presto! playtable complete! CONTINUE FOR PLAYSTOOL ASSEMBLY...
Page 15
Lean E against the wall. *duc insider tip* Steps in this assembly will require parts to be flat on the floor. Assemble on a soft surface to prevent any damage. Try a rug, a blanket, or even a sheet of foam from the packaging! Insert F connectors into slots on E.
Page 16
Push F down to lock connectors into place. Insert connector on G into remaining slot on E.
Page 17
Gently push G toward F so the connectors line up with the holes. *important note* Make sure NOT to push G in all the way. Have a friend hold G in place while you prepare for the next step. If G is not held in place, it can drop to the floor + splinter the connection.
Page 18
Push F down to lock connectors into place. Flip the playstool so the legs are facing up as shown. Apply the hammer cap (D) to the end of your own hammer. Tap G with the protected hammer until there is no gap at the seam to secure into place.
Page 19
okay, now you’re really done! give yourself a pat on the back, take a bow, or go house a pint of ice cream…we don’t judge.
Page 20
prefer to talk to a human instead? we’re here for you! contact our customer advocate team below 212.226.1868 quack@ducducnyc.com live chat at 200 lexington, no. 701 ducducnyc.com ny, ny 10016...
Need help?
Do you have a question about the STUDIO DUC JUNO PLAYTABLE and is the answer not in the manual?
Questions and answers