Century 4000 Pilots Operating Manual page 44

VOR Approach
Step 1. NAV/ATT or ALT.
The VOR approach
usually begins from an
enroute situation. The
heading bug and the OBS
are set to the same
degree radial. The
autopilot is providing
crosswind correction to
track the desired radial.
Step 2. HDG/ATT or ALT.
As the VOR is neared,
match the heading bug to
either the course or the
lubber line and press
HDG on the autopilot. Set
the OBS to the inbound
course. Control altitude
as necessary for the
procedure.
Step 3. REV/ATT or ALT.
As the VOR is crossed,
turn the heading bug to
the outbound course and
press the REV button.
Step 4. REV/ATT or ALT.
The autopilot will track
outbound and correct for
wind. Control attitude with
the modifier switches.
When the desired altitude
is reached press ALT.
Step 5. HDG/ATT or ALT.
To start the procedure
turn, press HDG and turn
the heading bug to the
outbound procedure turn
heading.
44