Century 4000 Pilots Operating Manual page 28

LOCALIZER Approach
STEP HSI
1
2
3
4
AP MODE REMARKS
HDG The localizer
approach begins with a
ALT or
transition from the enroute
ATT
structure
compass locator (LOM).
The heading bug is used
to select
heading.
altitude may be controlled
by the modifier switch or
through the use of the
altitude mode.
Inbound
direction is selected with
the course arrow.
Upon reaching the LOM,
REV
press the REV switch.
ALT or
The autopilot will intercept
ATT
and track outbound.
REV Upon tracking
localizer, the system will
ALT or
compensate for crosswind
ATT
and enter the "soft track"
mode. The procedure
turn outbound
may be selected with the
heading bug.
At the appropriate time,
HDG
press the HDG switch to
ALT or
begin the procedure turn.
ATT
Altitude appropriate to this
phase of the approach
should be controlled using
ALT or ATT as necessary
28
or ILS
to the outer
the desired
The aircraft's
The
Front Course
the
heading