Century 4000 Pilots Operating Manual page 42

Directional Gyro
VOR Navigation
OBS . Remarks
Step 1. NAV/ATT or ALT.
A 45° intercept to a
selected radial is
accomplished by setting
the OBS to the desired
radial and turning the
heading bug to that same
degree and then pressing
the NAV mode on the
autopilot.
Step 2. NAV/ATT or ALT.
After
autopilot will correct for
crosswind and adjust its
internal
and limit bank angles.
Step 3. NAV/ATT or ALT.
After station passage, the
OBS indicates a FROM
flag. If a course change is
required at the VOR, turn
the OBS and heading bug
to new course.
course change of more
than 45° is required, the
autopilot will re-cycle for a
standard intercept.
Step 4. NAV/ATT or ALT.
Station
accomplished by tuning
the receiver to the new
station.
Step 5. HDG/ATT or ALT.
For
passage,
desirable
autopilot
mode
Then
occurs turn the OBS and
heading bug to the new
radial and press NAV on
the autopilot.
42
intercept, the
radio authority
If a
switching is
smooth station
it might be
to cycle the
to the HDG
before passage.
after passage