Table of Contents
Advertisement
PROJECTION
Adjusting the Projection Image
Projection Brightness
Press the
PROJECTION
button to
adjust the projection's brightness
(HI/LOW/OFF).
Use the Rotation Wheel on the Projection Arm to rotate the
viewing angle of the image.
Note:
The fixed focus projection image will look best at about 7ft. (2.1m).
The Projection Arm tilts forwards and
backwards to adjust the location of the
projection image.
PROJECTION
Projection Options
Projection Image Options
You can choose to see the (1) time, (2) outdoor
temperature and humidity, or (3) cycle through
both options.
Outdoor weather information is only available if
an add-on sensor is connected.
Selecting Your Projection Image
1.
When an outdoor sensor is connected, hold the
PROJECTION
button on the top of the clock
to toggle between the projection options. If no
sensor is connected, this button will only adjust
the projection's brightness.
2.
Time will be the default projection image. Hold and release the
PROJECTION
button each time to switch between projection modes.
Time-Only Projection
09
*An add-on sensor is required for additional projection options. See p.15 for details.
Current Time
Outdoor Temperature
and Humidity
Outdoor Temperature &
Cycle Through Both Options
Humidity-Only Projection
outdoor
10
Advertisement
Table of Contents
