Table of Contents
Advertisement
ADD-ON SENSOR
Optional Add-On Sensor
Lost Connection
•
If the sensor loses connection to the clock for any reason, the clock will show
NO after 30 minutes of disconnection.
•
The Sensor Reception Icon
and the clock will search for up to 3 minutes every hour to try to reestablish the
connection.
•
To manually reconnect, hold the
the sensor.
•
Dashes will show while searching for the sensor and the
up to 3 minutes or until the sensor is connected.
Low Battery
The
icon will appear when the sensor
batteries needs to be replaced.
will disappear from the bottom right of the LCD
+
button on the top of the clock to search for
icon will flash for
APPENDIX
Specifications
1.80 in.
(4.57 cm)
5.0V Power Cord
Power Requirements:
(Included) HX18H-0503000-AU-001
CR2032 Battery for backup (Included)
The plug on the power adapter is intended
to serve as the disconnect device, the
socket-outlet shall be installed near the
equipment and shall be easily accessible.
2 Intensity Levels + OFF
Projection Brightness:
4 Intensity Levels + OFF
LCD Brightness:
(Programmable Auto-Dim Backlight Option)
Programmable Snooze Duration:
5 to 120 Minutes
17
8.39 in. (21.31 cm)
0.35 in.
(0.88 cm)
Wireless Charger Power Output:
5 Watts
USB "A" and "C" Charging Port:
1 Amp Maximum Current
(Charging Cords Not Included)
Indoor Temperature Range:
32°F to 122°F (0°C to 50°C)
Indoor Humidity Range:
Settings Backup:
will save Time and Alarm Settings when
power is lost. Projection will not show.
4.35 in.
(11.04 cm)
10% to 99% RH
The CR2032 Battery
18
Advertisement
Table of Contents
