Panasonic NA-D106X1 Service Manual page 51

Number of Check Checking contents
times "Wash" process
button is
pressed
• Each time "Rinse"
button is pressed,
displays those
operation times.
10 P • Initial display.
(This part is not
using this model)
11 L • Limit the maximum
number of spin
rotations.
12 V • Microprocessor
Ver. No. display.
• Electrostatic touch
microprocessor
Ver. No. display.
LED display indication
P0
L0
51
Operation contents
• Each time "Rinse" button is pressed, displays those
operation times in the following order.
• Initially LED display shows "C".
• Press once "Rinse" button :
Indicate Thousand and Hundreds for Washing times
is displayed on LED display.
• Press twice "Rinse" button :
Indicate Ten and One for Washing times is displayed
on LED display.
• Press 3 times "Rinse" button :
Indicate Thousand and Hundreds for Drying times is
displayed on LED display.
• Press 4 times "Rinse" button :
Indicate Ten and One for Drying times is displayed
on LED display.
• Press 5 times "Rinse" button :
Indicate "C" on LED display. i.e. Returned to initial
display.
* During Thousand and Hundreds digit displayed,
"min" LED is illuminate.
* During Ten and One digit displayed, "cup" LED is
illuminate.
Panel display : "Rinse" blinks.
Initially LED display shows "P0" .
Panel display : "Spin" and "Dry" blinks.
• Initially LED display shows "L0 ". This means no
limitation for spin rotations.
• Press once "Rinse" button: display shows "L1". This
is preform of maximum number of spin rotation limits
to 900 rpm.
• Press twice "Rinse" button : display shows "L0"
again .
• After selection of "L0" or "L1" by pressing "Rinse"
button, the setting have memorized by Pressing
"Start/Pause" button.
Panel display : "Rinse" and "Spin" blinks.
• Displays the power microprocessor version number
by a number.
• Hold down "Time" button, displays the electrostatic
touch microprocessor version number by a number.
NA-D106X1