NA-D106X1
5. Disengage the 8 hooks on the Detergent case A and
Nozzle.
*Take all hoses off.
8.8.
Body B, Door lock switch,
Body band B, Body support D,
Lid hinge cover and Lid hinge
U
8.8.1.
Replacement of Body B
1. After performing the procedures for Replacement of
Panel A, Dry filter, Filter frame and Top board (8.1),
Replacement of Lead wire cover (8.2.2), Replacement of
Door (8.2.4) and Replacement of Controller (Power side)
(8.4.1 Replacement of Panel B), remove the Lid hinge
cover and then remove the 8 Body B fixing screws.
8.8.2.
Replacement of Door lock switch
1. After performing the procedures for Replacement of Body
B (8.8.1), remove the 1 Clamping band fixing the lead
wire for the Door lock switch and connector, and then
remove the 2 Door lock switch mounting screws.
36