Samsung WA10VP Service Manual page 5

1. Safety Instructions
If faulty, replace it immediately.
Completely remove any dust or foreign material from the housing, wiring and connection
parts.
When connecting wires, make sure to connect them using the relevant connectors and
check that they are completely connected.
Make sure to discharge the PBA power terminals before starting the service.
Failing to do so may result in a high voltage electric shock.
Check the wiring.
Ensure that no wire touches a rotating part or a sharpened part of the electrical
harness.
Check for any water leakage.
Perform a test run for the washing machine using the standard course and check
Do not allow consumers to repair or service any part of the washing machine themselves.
This may result in personal injury and shorten the product lifetime.
If it seems that grounding is needed due to water or moisture, make sure to run
grounding wires.
(Check the grounding of the power outlet, and additionally ground it to a metallic water
pipe.)
Failing to do so may result in electric shock due to electric leakage.
[Running a grounding wire]
- Twist a grounding wire (copper wire) two or three times around the tap.
- If you connect the grounding wire to a copperplate, bury it 75 cm under the earth in a
place with a lot of moisture.
Do not connect the grounding wire to a gas pipe, plastic water pipe or telephone
1-2
While Servicing
After Servicing
Grounding
terminal