Table of Contents
Advertisement
3. Disassembly and Reassembly
Part Name
SHAFT-ASSY
ASSY-MOTOR
Assembly is performed in the reverse order of disassembly.
3-10
Disassembly Picture
Description
<Checklist after Replacing the Assy Shaft>
1. Check if the TOOTH is engaged with
the Sleeve Wing at a depth of 3.5mm
~ 5.5m during the wash operation.
(When the Drain Motor is off)
If the depth of the engagement is not
deep enough, a binding symptom
may occur during the washing
operation.
2. Check if the TOOTH is separated from
the end of the wings of the Sleeve
by at least 1.0 mm during the
Drain Motor is off)
If the separation distance is too
short, noise and binding symptoms
operation.
1. Pull the Assy-Motor Housing to
separate it.
2.
Remove the 4 bolts holding the
driver).
Hide quick links:
Advertisement
Table of Contents
