Table of Contents
Advertisement
During Servicing
1. When replacing the suspension-bar, be sure to check both the front and rear suspension-bar
assemblies. This prevents installation of the front and rear sides in the reverse order.
2. Reversal may cause a severe vibration that might rock the washing machine.
3. When replacing the suspension-bar, only use parts for this model.
4. Since the length of the bar varies among on models, installing the wrong size may cause severe vibration.
5. Do not deform the check-S/W rod of the top-cover.
6. The installation of a deformed check-S/W rod will result in malfunction of the safety switch during
severe vibration, thus causing an unbalanced error.
After Servicing
1. Check the level of the washing machine.
2. When setting the wire bundle in the lower section, make sure that the wire bundle is not stressed by
any tension due to tilting of the tub assembly.
3. When setting the wires, do not let the wires touch any sharp edges.
4. Remove any moisture on the wire bundle, and on areas surrounding the wire connector.
3. Disassembly and Reassembly
3-3
Hide quick links:
Advertisement
Table of Contents
