Page 2
The Plethysmograph has one primary connector that plugs into any of the auxiliary inputs on the LX4000. To turn on the Auxiliary input, open the Lafayette Instrument Co. LXSoftware and go to “Tools” > “Preferences” and choose the Auxiliary input that the Plehtysmograph is plugged into, and click on “enable sensor trace”. After enabling sensor trace, turn on the hardware by pressing the button on the in-line switch box.
Page 3
Model 76604US User’s Manual Examiners should begin each examination with an acquaintance test to ensure that the pulse wave is recorded at the proper amplitude (about 3/4 inch) and that the tracing is not erratic. Some adjustment and experimentation may be required to find the optimal recording site on the hand.
Page 4
During this period, tended to most recognized educational institutions, hospitals Lafayette Instrument will repair or replace, at its option, any and government agencies. Net amount due 30 days from the equipment found to be defective in materials or workman- date of shipment.
Need help?
Do you have a question about the 76604US and is the answer not in the manual?
Questions and answers