BEFORE YOU BEGIN
BEFORE YOU BEGIN
IMPORTANT !
·
Observe all local plumbing and building codes.
·
Turn off the water supply.
·
Before installation carefully inspect the new fixture for any
signs of damage.
·
The Kohler Bidet is designed for connection to a hot and
cold water supply.
·
Refer to roughing-in sheet for dimensional information.
·
Site preparation may require additional tools and
hardware.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain import care, cleaning, and
warranty information please leave these instructions for
the consumer.
·
Installer: This manual is the property of the customer and
must be retained with the product for maintenance and
operational purposes.
SAFETY: WARNINGS
Kohler products are precision-engineered and should give
continued superior and safe performance, provided:
1. They are installed, commissioned, operated and
maintained in accordance with the recommendations given
in this Manual.
2. Periodic attention is given, as necessary, to maintain the
product in good functional order. Recommended guidelines
are given in the
MAINTENANCE
Carefully inspect the new fixture for any signs of damage.
When installing Kohler Products, manufacturers guidelines for
power tool safety should be followed.
RECOMMENDED TOOLS AND MATERIALS
(Not Supplied)
·
Hexangular wrench
·
Safety Glasses
·
Pencil
·
Tape Measure
·
Sealant
·
Drill
·
Adjustable Wrench
1037581-T01-A
section.
-1-
·
·
·
·
·
·
·
·
·
1.
2.
(
·
·
·
·
·
·
·
ã
ã
Copyright Kohler China Ltd., 2004
INSTALLATION INSTRUCTIONS
VITREOUS CHINA BIDET
K-19044T
)
, 2004