Table of Contents
Advertisement
9
Cyber security
9.1
Disclaimer
These products are designed to be connected and to communicate information and data via a
network interface, which should be connected to a secure network. It is customer's sole
responsibility to provide and continuously ensure a secure connection between the product and
customer's network or any other network (as the case may be) and to establish and maintain
appropriate measures (such as but not limited to the installation of firewalls, application of
authentication measures, encryption of data, installation of antivirus programs, etc.) to protect
the product, the network, its system and interfaces against any kind of security breaches,
unauthorized access, interference, intrusion, leakage and/or theft of data or information. ABB
and its affiliates are not liable for damages and/or losses related to such security breaches,
unauthorized access, interference, intrusion, leakage and/or theft of data or information.
Although ABB provides functionality testing on the products and updates that we release, you
should institute your own testing program for any product updates or other major system
updates (to include but not limited to code changes, configuration file changes, third party
software updates or patches, hardware change out, etc.) to ensure that the security measures
that you have implemented have not been compromised and system functionality in your
environment is as expected.
9.2
Performance and service
Network performance
Type
Ethernet
ARP
ICMP
IP
Port and service
Port
Service
5070
UDP
7777
TCP/UDP
10777
TLS
7005
TCP
8887
TCP
Product manual 2TMD042100D0003
Value
24 Mbps (37,449 packets/sec)
12 Mbps (18,724 packets/sec)
22 Mbps (34,328 packets/sec)
22 Mbps (34,328 packets/sec)
Purpose
To be used by SIP client.
To be used for device management.
Secure channel for device management
To be used for connectivity detection when this feature is enabled.
To be used for firmware update.
Cyber security
│35
Advertisement
Table of Contents
