Adjustment Method - Panasonic TX-32LX600F Service Manual

Adjustment Method

Sub-Contrast/White Balance Adjustment
Instrument Name
1. Remote controller
2. LCD WB meter (Minolta CS-1000A equivalent)
3. Comunication jig
4. Computer for external control
Subcontrast adjustment
1. Receive PAL colour bar (100% white) RF signal.
2. Enter "Sub-Contrast" adj. In SERVICE 1 mode.
3. Start adjusting by using Blue Key.
4. If the adjustment finished normally, the letter of "Sub-Contrast" will change
from red to black
White Balance adjustment
1. Procedure basically perform checking using the production software and make
automatic adjustment using external computer.
2. It adjust in the mode of Colour balance Normal as follows.
TX-32LX600F, TX-32LX600P
TOP Normal
x: 0,2800 ± 0,003
y: 0,2850 ± 0,003
GRAY Normal
x: 0,2800 ± 0,003
y: 0,2850 ± 0,003
The address of EEPROM to write is as follows
Add. C148-C159
All manuals and user guides at all-guides.com
Connect to
Procedure
TX-26LX600F, TX-26LX600P
TOP Normal
x: 0,2800 ± 0,003
y: 0,2850 ± 0,003
GRAY Normal
x: 0,2800 ± 0,003
y: 0,2850 ± 0,003
17
Remarks
Correlation can be also taken by
CA-210 or equivalent
Remarks
Let the panel standfor more than 3
hours at more than 20 °C.
Basically perform adjustment in the
ambient environment of room
temperature more than 20 °C.
The aging time is more than20 min
at above room temperature.
Applied signal
100% full colour bar
0,7V p-p white peak
87.5% modulation