Setting Oven Lockout Feature; Setting Bake - Frigidaire FFET2725L Use And Care Manual

setting oven controls

Setting Oven Lockout Feature

The clear off pad controls the Oven Lockout feature.
The Oven Lockout feature automatically locks the oven
doors and prevents the oven from being turned on. It
does not disable the clock, Kitchen Timer or the interior
oven lights. The ovens can be locked individually.
To activate the Oven Lockout feature:
1. Press and hold clear off pad for 3 seconds.
2. After 3 seconds a beep will sound, "door",
"LOCKED" will flash and "loc", "uPPer" and
appear in the display. Once the oven door is locked the
"door" and "LOCKED" indicator will stop flashing
and remain in the display.
To reactivate normal oven operation:
1. Press and hold clear off pad for 3 seconds. A beep will
sound. "uPPer" "loc" and
display. "door" and "LOCKED" will flash in the display
until the oven door has completely unlocked.
2. The wall oven is again fully operational.

note
Because you can set the oven lockout individually, the
lower oven can be used when the upper oven lockout
feature is on.
10
will
will disappear from the

setting Bake

The Bake pad controls normal baking. The oven can be
programmed to bake at any temperature from 170°F to
550°F (77°C to 288°C).
To set the Bake Temperature:
1. Arrange interior oven racks.
2. Press Bake pad, "- - -" will appear, "uPPer" and
"BAKE" will flash in the display.
3. Press up or down arrow pad to set the desired
temperature. The desired temperature will appear,
"uPPer" and "BAKE" continue flashing in the display.
4. Press start pad or wait 5 seconds. "uPPer" and
"BAKE" stop flashing and the oven icon will appear
in the display. A beep will sound once the oven
temperature reaches the desired baking temperature.
Pressing clear off pad will cancel the Bake feature
at any time.
to change the Bake temperature
1. After the oven has already been set to bake and the
oven temperature needs to be changed, press Bake
pad. "uPPer" and "BAKE" will start flashing in the
display.
2. Press up or down arrow pad to increase or decrease
the set temperature.
3. Press start pad or wait 5 seconds. "uPPer" and
"BAKE" will stop flashing and remain in the display. A
beep will sound once the oven temperature reaches
the desired baking temperature.

note
If the oven was recently heated from prior cooking and
has remained heated, the bake element symbol may
not show in the display immediately.