Using The Remote Controller-Advance - Youcan Robot BW Space Pro Quick Start Manual

2
Connect to WiFi
A c c e s s t h e m o b i l e p h o n e W i F i
connection interface, select Youcan-****-
5G(Recommended) or Youcan-****, enter
the password: 12345678.
3
Open Youcan Dive App
After the WiFi connection is successful,
open the Youcan Dive APP, connect the
device, select BW Space Pro, enter directly
or log in by account. After the connection
is successful, slide to the right to unlock,
and the boot is successful. At this point, you
can use the APP to control the underwater
movement and shooting of the drone.
In case of start failure, please check if the following conditions exist:
If the device is appropriately powered;
If the connector of the tether is connected to the jack of the BW Space Pro or WiFi
Repeater appropriately;
Access the mobile phone WiFi connection interface and check if the WiFi Repeater
signal is successfully connected.

Using the Remote controller-Advance

1
Charging for the Remote Controller
Connect the USB to the charging interface
of the remote controller. The power indicator
blinks, indicating that it is being charged.
04
Back Home
Slide to Unlock
Charging
interface