Sonarmite Serial Commands; Memory Operations - ohmex SONARMITE v3.0 Manual

SonarMite Serial Commands

☺
(^H)elp
Pressing ^H (Contol H) will display the following help information as an aid memoir
to the available commands...
^Help,Format,Version,Id,Save,[Reset,Load,U/Dsos]
Commands shown in parenthesis [ ] are only available in the SYS> format.

Memory Operations

☺
(^R)eset
Pressing ^R (Contol R) will reset the SonarMite to its default values, these values are
saved in Flash memory and set in current working RAM memory
the SYS> output mode).
☺
(^L)oad
Pressing ^L (Contol L) will reload the Flash memory into the current working
memory. (only available in the SYS> output
☺
(^S)ave
Pressing ^S (Contol S) will save the current working memory area to Flash memory
to become the system settings on reboot.
SonarMite v3.0 (c)2009 Lymtech LLC
Page 15
mode).
(only available in
6/13/2009