Table of Contents
Advertisement
SonarMite v3.0 (c)2009 Lymtech LLC
CONNECTIONS
The only accessible connectors on the SonarMite are those on the front of the machine
referred to as the „Transducer‟ and „Computer‟ connections.
There are no user
connections or serviceable parts within the SonarMite body itself.
'Computer' connection
This 4 way female connector is used to connect to either a PC serial connection or for
an incoming ASCII data stream such as GPS in a „Polled‟ connection.
'Transducer/Charger' connection
This 4 way male connector is used to connect to the SonarMite transducer, the same
connection is also used for the battery charger connector.
CONNECTING
EXTERNAL POWER OTHER THAN THE CHARGER PROVIDED TO THE
INTERNAL BATTERIES IS NOT RECOMMENDED AND MAY CAUSE
SERIOUS DAMAGE !
Transducer and Computer connections
Page 13
6/13/2009
Advertisement
Table of Contents
