Advertisement
Save these instructions. For your safety, read and understand the information contained within. The owner and
operator shall have an understanding of this product and safe operating procedures before attempting to use this
product. Instructions and Safety information shall be conveyed in the operators native language before use of this
product is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with
the use and misuse of the product. If any doubt exists as to the safe and proper use of this product as outlined in
this factory authorized manual, remove from service. Inspect before each use. Do not use if broken, bent, cracked
or otherwise damaged parts are noted. If the ram has been or suspected to have been subjected to a shock load (a
load dropped suddenly, unexpectedly upon it), discontinue use until checked out by an authorized factory service
center. Owners and operators of this equipment shall be aware that the use and subsequent repair of this equipment
may require special training and knowledge. It is recommended that an annual inspection be done by qualified
personnel and that any missing or damaged parts, decals, warning / safety labels or signs be replaced with factory
authorized replacement parts only. Any kit that appears to be damaged in any way, is worn or operates abnormally
shall be removed from service immediately until such time as repairs can be made. Labels and Owners Manuals are
available from manufacturer (see Replacement Parts, pages 6, 7).
PRODUCT DESCRIPTION
KTI Body Repair Kits are designed to be used for pushing, spreading, and pressing of vehicle body panels as well as
various component parts and assemblies. A variety of attachments are included. Pumps are rated from 8,000 to
10,000 PSI. Rams are rated from 4 to 10 tons.
WARNING: when extension tubes and/or offset attachments are used, the rated capacity is always
reduced by 50 % for each tube or attachment connected. See Parts Section for identification of "offset"
attachments.
SPECIFICATIONS
Pump
Model
Capacity
KTI-63705
8000 psi
KTI-63711
10000 psi
Ram
Capacity
Closed Height
4 ton
11"
10 ton
13 5/8"
Ram
Number of
Atachments
Extended Height
15 3/4"
19 3/4"
2
Operating
Weight
Force
14
101 lbs
56 lbs
13
79 lbs
88 lbs
KTI-63705-M0
Advertisement
