Setting Speed; Setting Timer - Fagron InvoMatic User Manual

4.2 Setting Speed

1.
Connect power supply cord
on appropriate outlet.
4.
Press the "SPEED" button,
the display will flash.

4.3 Setting Timer

1.
Press the "STOP" button twice.
4.
Once the desired time is set, press
the "TIMER" button again to set.
This will stop the display flashing.
2.
Turn the power switch located on the
rear of the device to the "ON" position.
5.
Adjust the speed by using the "UP"
and "DOWN" buttons.
2.
Press the "TIMER" button,
the display will flash.
6
3.
Press the "STOP" button twice.
6.
Once the desired speed is set, press
the "SPEED" button again to set.
This will stop the display flashing.
3.
Adjust the timer by using the "UP"
and "DOWN" buttons.