Table of Contents
Advertisement
3. Technical Parameter
3.1 Speci�ications
Electrical requirements
3.2 Operating Conditions
Ambient temperature
Maximum relative humidity
Supply voltage fluctuation
4. Functions and Use
4.1 Assembling the inversion arm
1.
Remove the screws (1) and washers (2).
2
3.
To fit the inversion arm, place the orange belt (1)
over the pulley (2).
Model
InvoMatic
100 – 240V, 50 – 60Hz
Noise level
55 dB
Weight (empty)
10.0 kg
Location
Indoor use only
Altitude
Up to 10.000 ft (3.048 m)
32ºF to 104ºF (0ºC to 40ºC)
10% - 90% RH @ 32ºF to 104ºF
(0ºC to 40ºC)
Up to 24V
2
1
2
1
1
2.
Fit the stabilizer (3), push it down (3), and fit
washers (2) and screws (1).
2
1
4.
Keep tension on the
orange belt (1) and push
the arm downwards
onto the driveshaft (2).
5
2
1
2
1
3
3
5.
Tighten the screw
with the tool supplied.
Ensure the screw (3)
is on the flat portion
of the driveshaft.
Advertisement
Table of Contents
