Introduction: Industrial Series 24 Volt 5 Amp (Is2405); Led Function - PRO Charging System IS2405 Quick Start Manual

Introduction: Industrial Series 24 Volt 5 Amp (IS2405)

The IS2405 is a safe, fully automatic, efficient, multi-
stage full switching charger. It may be used in all parts
of the world with its advanced universal AC input (100
of 240VAC). The dual bi-color LED's let you know the
condition of the battery and if there are any problems.
Instructions: LED Function:
LED Lights
Power
Charge
Power
Charge
Power
Charge
Caution:
If the "charge" LED remains red for more than 24 hours. Unplug
charger from AC power and check the batteries. There may be
a problem with the batteries. Call PCS Technical Support with
questions.
If the Power LED is red, unplug the charger from the
unit and unplug from AC (wall socket). Wait 10 seconds
and try again. If the Power LED remains red, call our
service department. Note that if the battery voltage is
less than 5 volts, the charger will not charge for safety
reasons. Battery replacement may be necessary.
Green
Red
Green
Green
Red
Off
Condition
AC Connection
Batteries fast charging
AC Connection
Ready for use
Error, short circuit, leads reversed,
battery disconnected or battery
voltage is less than 5VDC