Solo Music Gear FBBK-1 Assembly Manual

Fb style diy electric bass guitar kit

Download this manual

Solo FB Style DIY

Electric Bass Guitar Kit

Assembly Manual

FBBK-1

V 1.02

Need help?

Do you have a question about the FBBK-1 and is the answer not in the manual?

Page 2 Post your photos to The Solo Café http://TheSoloCafe.com Remember, you can always find us online at http://SoloMusicGear.com to upgrade your parts, try a new kit, or ask us a question. Copyright © 2011 Solo Music Gear. All rights reserved v1.02...
Page 4 Repeat until you have all 4 screws threaded into the neck. Now you can proceed to drive these screws in until they are almost tight. Double check that the neck aligns with the bridge screw holes, and once satisfied, tighten all 4 screws to the neck. Copyright © 2011 Solo Music Gear. All rights reserved v1.02...
Page 5 STEP 3 – Installing the Bridge. The FBBK-1 comes with a vintage style plate bridge which is fastened to the bass with 5 screws. Before installing the bridge itself, take the supplied red ground wire and strip about 3/8"...
Page 6 Guitar playability and intonation depends on its setup, so you may want to spend some time mastering the necessary skills – be persistent in finding the optimal action (string height), neck relief and intonation throughout the entire neck. Copyright © 2011 Solo Music Gear. All rights reserved v1.02...
Page 7 This method is less accurate because the fretted string sounds a bit sharper due to the height of the string, and the higher the action, the sharper it gets. Copyright © 2011 Solo Music Gear. All rights reserved v1.02...