Solo Music Gear SRBK-15 Assembly Manual

Style diy electric bass guitar kit

Download this manual

Solo SRBK-15 Style DIY

Electric Bass Guitar Kit

Assembly Manual

SRBK-15

V 1.02

Need help?

Do you have a question about the SRBK-15 and is the answer not in the manual?

Page 2 Post your photos to The Solo Café http://TheSoloCafe.com Remember, you can always find us online at http://SoloMusicGear.com to upgrade your parts, try a new kit, or ask us a question. Copyright © 2011 Solo Music Gear. All rights reserved v1.02...
Page 4 (IMPORTANT: firmly support the headstock!) Next insert Machine Heads from the back and align them properly. Complete machine heads installation by tightly fastening Machine Heads with the screws. Copyright © 2011 Solo Music Gear. All rights reserved v1.02...
Page 5 Cut the string 2 tuners longer than the tuner you are going to stick it in. On D and G you will just have to estimate. Stick the end all the way down in the hole and bend a 90 degree. Hold on to the string and wind it up. Copyright © 2011 Solo Music Gear. All rights reserved v1.02...
Page 6 12 th fret: .094” – .1” (2.4 – 2.6mm). For the4 th String (the thickest) – height at the 1st fret: 0.022” – 0.025” (0.55 – 0.64mm); at the 12 th fret: .094” – .0110” (2.6 – 2.8mm). Copyright © 2011 Solo Music Gear. All rights reserved v1.02...