Page 1
® Agri-Fab OWNERS MANUAL Model No. 45-0175 EXPLORER "10" POLY DUMP CART CAUTION: Read Rules for Safe Operation Assembly and Instructions Operation Carefully Maintenance Repair Parts the fastest way to purchase parts www.speedepart.com PRINTED IN USA FORM NO. 48227 (REV. 7/03)
SAFETY RULES Remember, any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using power equipment. CAUTION: VEHICLE BRAKING AND LOOK FOR THIS SYMBOL TO POINT OUT STABILITY MAY BE AFFECTED WITH IMPORTANT SAFETY PRECAUTIONS.
Page 3
HARDWARE SHOWN FULL SIZE Not Shown Full Size HARDWARE PACK Ref. Quant. Description Hex Bolt, 1/4" x 3/4" Hex Bolt, 1/4" x 1-3/4" Hex Bolt, 5/16" x 3-3/4" Hex Bolt 3/8" x 1-1/4" Truss Head Bolt 5/16" x 3/4" Hex Nut, 1/4" Lock Nut 5/16"...
4. Hook the short end of the spring into the hole in the ASSEMBLY INSTRUCTIONS latch lock lever. Use the spring puller tool to hook the long end of the spring into the square hole in the tongue. The spring puller tool can be stored when TOOLS REQUIRED FOR ASSEMBLY finished.
Page 5
7. Assemble the axle and drawbar tongue to the wheel 9. Assemble the latch stand plate and the latch stand support, with the open side of tongue facing away bracket to the bottom of the poly tray using four 1/4" from the wheel support.
OPERATION MAINTENANCE CAUTION: VEHICLE BRAKING AND 1. At the beginning of each season, using a light STABILITY MAY BE AFFECTED WITH machine oil, lubricate the latch, the latch pivot THE ADDITION OF AN ACCESSORY bolt, and the area of the axle where the draw bar OR AN ATTACHMENT.
Page 8
REPAIR PARTS FOR POLY CART MODEL 45-0175 12 13...
Page 9
REPAIR PARTS LIST FOR POLY CART MODEL 45-0175 REF. PART QTY. DESCRIPTION 47019 Poly Tray 24528 Axle, 1" 47049 Wheel 24758 Tongue, Draw Bar 24386 Latch Stand Plate 24497 Latch Stand Bracket 24527 Wheel Support 24498 Latch Lock Lever 47407 Hex Bolt 5/16-18 x 3-3/4"...
SLOPE GUIDE (Keep this sheet in a safe place for future reference.) Use this guide to determine if a slope is safe for the operation of your tractor and cart. Refer also to the instructions in your vehicle owners manual.