Removing The Perforated Margins - Epson Stylus Color 670 Manual

❏ Load the paper printable side up with the perforated margins
positioned as shown in the illustration.
❏ Use flat, undamaged paper. If the paper or the support sheet
is curled, flatten it before loading to avoid paper feeding
problems.
❏ Always place the included support sheet under the stack of
Photo Paper, but do not print on it.
❏ You can load up to 20 sheets of 4 × 6 inch Photo Paper or one
sheet of 200 × 300 mm Photo Paper into the sheet feeder.
❏ Do not fold the paper before printing.
❏ Cut or tear the paper at the perforation only after printing.
❏ Select Photo Paper as the Media Type setting and Photo
Paper 4 × 6 in or Photo Paper 200 × 300 mm as the Paper
Size setting in your printer driver.

Removing the perforated margins

Note the following when removing the perforated margins.
1-8
Paper Handling
loading position