Stealth Cam G34MAX Instruction Manual page 11

❖ Custom Settings Continued
DVR MODE: This setting allows you to continuously
record new images/videos. Turning this setting ON will
continuously delete oldest recorded files to make space
for new files. When turned OFF, the camera will stop
recording new files when SD card reaches capacity.
OPTIONS: On | Off
LATITUDE: This setting is used for the GEO-­­TAG of the
camera. It will not be displayed on the images directly,
but rather on the background image information. The
coordinates can be changed from 000.000000 -
179.999999 and either N (North) or S (South).
❖
LONGITUDE: This setting is used for the GEO-­­TAG of
the camera. It will not be displayed on the images
directly, but rather on the background image
information. The coordinates can be changed from
000.000000 - 179.999999 and either E (East) or W
(West).
FACTORY RESET: This option will reset the camera to its
factory defaults. This will erase any CUSTOM camera
setup present.
OPTIONS: Yes | No
❖
SECURITY KEY: This setting allows the owner of the camera
to program a four (4) character alphanumeric code to
prevent unauthorized access to their camera settings.
Default code is 0000.
NOTE: The camera owner is responsible for
remembering the code. Should the code be forgotten
the owner must call in to Customer Service (877-269-
8490) for directions on getting the unit restored to
factory defaults. In order for the owner to be authorized
for the reset, this camera must be registered with
Stealth Cam.
❖
❖
FORMAT CARD: This setting is used to format the SD
memory card installed. Formatting your SD card will
ERASE ALL DATA PRESENT. To format card, change
setting to Yes and press Enter.
NOTE: After card is formatted it is impossible to restore
data that was present on card.
❖
LANGUAGE: This feature allows you to select display
language for the menu.
❖
Page 11