Stealth Cam G34MAX Instruction Manual page 10

Custom Settings
❖
SETUP DATE: This setting is used by the camera to display
the correct date on the Info Bar of the image.
❖
SETUP TIME: This setting is used by the camera to display
the correct time on the Info Bar of the image.
❖
TIME ZONE: This setting allows you to set your camera to
different time zones.
OPTIONS:
Eastern | Central | Mountain | Pacific | Alaskan |
Hawaiian
❖
MODE: This setting will change the operation mode of the
camera. Different operation modes will have different
adjustment settings.
OPTIONS: PIR Photo | PIR Video | Time Lapse
❖
TIME FORMAT: This setting is used by the camera to
change the display format for the time in the Info Bar of
the image.
OPTIONS: 12 hr | 24 hr
NOTE: If 24 hour format is selected, previous SETUP TIME
will be adjusted and AM/PM will be removed.
OPERATING HOURS: This option is available for PIR
PHOTO and PIR Video settings. This feature allows you to
designate a time for the camera to be active.
OPTIONS:
24/7: Camera is always on.
SCHEDULED: Selecting this will allow you to enter a
time range for the camera to be active and
operational. Camera will not take photos outside of
defined time range.
START TIME (HH:MM): Start time for camera to
be active.
END TIME (HH:MM): Time at which you want
the camera to no longer be operational.
CAMERA NAME: This setting is used to adjust the camera
name. Camera name can be up to 13 characters long using
alpha (A-Z) numeric (0-9) characters.
TEMPERATURE: This setting is used to change temperature
format on Info Bar.
OPTIONS: Farhenheit | Celsius
INFO BAR: This setting is used to tell the camera whether
the Info Bar should be displayed at the bottom of images
or video.
OPTIONS: On | Off
Page 10