GPI 01A Series Owner's Manual

0 1 A S E R I E S S P E C I F I C A T I O N S
Model
Unit of Measurement
Flow Rate
Working Pressure
Operating Temperature
Storage Temperature
Threads
L I M I T E D W A R R A N T Y P O L I C Y
Great Plains Industries, Inc. 5252 E. 36th Street North,
Wichita, KS USA 67220-3205, hereby provides a limited
warranty against defects in material and workmanship.
This product includes a two-year warranty. The warranty
shall extend to the purchaser of this product and to any
person to whom such product is transferred during the
warranty period.
The warranty period shall begin on the date of the
original new equipment purchase. Warrantor's obligation
hereunder shall be limited to repairing defective
workmanship or replacing or repairing any defective part
or parts.
This warranty shall not apply if:
A. the product has been altered or modified outside
the warrantor's duly appointed representative;
B. the product has been subjected to neglect,
misuse, abuse or damage or has been installed
or operated other than in accordance with the
manufacturer's operating instructions.
To make a claim against this warranty, notice of claim
must be given in writing to the company at its above
address no later than 30 days after the expiration of the
01A Series
Electronic Digital Meter
For use with:
Petroleum Fuels Only
Batteries included.
Connect before use.
U.S.
01A31GM
Gallon
3 to 30 GPM
300 PSI
+14° F to +130° F
-40° F to +158° F
1-inch NPT
3/4 in. fittings
included
Canada
01A31LM
Litre
10 to 100 LPM
20.7 bar
-10° C to +54° C
-40° C to +70° C
1-inch NPT
3/4 in. fittings
included
warranty period. Such notice shall identify the defect
in the product. The company shall, within 14 days of
receipt of such notice, notify the customer to either send
the product, transportation prepaid, to the company
at its office in Wichita, Kansas, or to duly authorized
service center. The company shall perform all obligations
imposed on it by the terms of this warranty within 60
days of receipt of the defective product.
GREAT PLAINS INDUSTRIES, INC. EXCLUDES LIABILITY
UNDER THIS WARRANTY FOR DIRECT, INDIRECT,
INCIDENTAL AND CONSEQUENTIAL
INCURRED IN THE USE OR LOSS OF USE OF THE
PRODUCT WARRANTED HEREUNDER.
The company herewith expressly disclaims any warranty
of merchantability or fitness for any particular purpose
other than for which it was designed.
This warranty gives you specific rights and you may
also have other rights which vary from U.S. state to U.S.
state.
Note: In compliance with MAGNUSON MOSS
CONSUMER WARRANTY ACT – Part 702 (governs
the resale availability of the warranty terms).
See inside for Owner's Manual.
International
01A12LM
Litre
10 to 100 LPM
20.7 bar
-10° C to +54° C
-40° C to +70° C
1-inch ISO.
No fittings
included
DAMAGES
113255-1
02/15 920792-01A