Notes On Radio Operation; Individual Components; Smartconnect Easy - FUHR SmartConnect easy Operation Manual

2.3

Notes on radio operation

The radio transmission takes place on a non-exclusive transmission path. This can lead to interference
from other radio applications. Switching operations, electric motors or defective electrical appliances can
also cause interference. The transmission power and reception characteristics of the SmartConnect easy
depend heavily on constructional and ecological conditions. Thus, the range in the open field differs
from that in buildings. Also, the signal is transmitted differently at high humidity than at lower humidity.
SmartConnect easy complies with the requirements and regulations of Directive 1999/5/EC. The
Declaration of Conformity can be found at www.smart-door.net.
Please make sure that in the case of a data interruption, for example due to a power failure,
relevant applications such as door locks can be operated differently (e.g. mechanically with a
cylinder key).

3 Individual components

3.1

SmartConnect easy

The SmartConnect easy provides the connection between the applications, e.g. your FUHR multi-point-
lock in the front door, and your smartphone. The communication between smartphone and
SmartConnect easy is done via WLAN and optionally via the Internet (see chapter 10.4 Network
Configuration). Whereas the communication between SmartConnect easy and the individual
components, such as the radio socket, is done using 868MHz radio.
For use, plug the SmartConnect easy into a Schuko socket and install the corresponding SmartConnect
app on your smartphone (see chapter 3.2
CARL FUHR GmbH & Co. KG  D-42579 Heiligenhaus
3.2 SmartConnect App).
5 / 35 www.smart-door.net