Table of Contents
Advertisement
Available languages
Available languages
C
LIMATIC CLASS
SN
N
ST
T
3. Installation
All dimensions in these chapters are given in millimetres.
The minimum distances required for proper ventilation can be found in chapter
3.2.2 V
ENTILATION
3.1 Unpacking and positioning
WARNING! While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
1. This appliance is not intended for built-in installation.
2. Unpack the appliance carefully. Dispose of the packaging as described in chapter
waste management.
3. Remove all packaging materials.
4. The accessories of your appliance can be protected from damage due to
transportation (adhesive tapes etc.). Remove such tapes very carefully. Remove
remains of such tapes with a damp cloth using lukewarm water and a mild
detergent; see also chapter
components of the back of the appliance!
5. Install the appliance in a suitable position with an adequate distance from sources
of heat and cold.
6. If installation near a heat source is unavoidable, use a suitable insulation plate or
keep the following minimum distances to the heat source:
to another refrigerators:
to electric cookers:
to radiators or ovens:
7. Install the appliance in a dry and well-ventilated place.
8. Protect the appliance from direct sunlight.
+10
→+32
0
+16
0
→+32
+16
→+38
0
+16
0
→+43
.
CLEANING AND MAINTENANCE
~ 52 ~
A
MBIENT TEMPERATURE
C
0
0
C
inner home temperature
C
inner home temperature
0
0
C
inner home temperature
min. 20 mm
min. 30 mm
min. 300 mm
e.g. unheated cellar
. Never remove any
Advertisement
Table of Contents
