Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, the A logo, Symantec, the Symantec logo, the Checkmark logo, Blue Coat, and the Blue Coat
Figure 1). For information on other deployments, see the PacketShaper software documentation, available at: techdocs.broadcom.com NOTE: Network cables are not included with the appliance. Make sure to use only straight-through Ethernet cables. 7. Connect the appliance to a power source:...
Page 3
If the appliance is not connected to the Internet, you can Amber blinking Critical fault manually download the license from the Broadcom My Entitlements page and then upload it to the appliance, after which the license load command can be used in CLI.
Page 4
1. Download the license file from My Entitlements: 6 — Perform a Graceful Shutdown Go to support.broadcom.com/security and click My Entitlements. When prompted, enter the admin User- Before mounting the appliance, log in to CLI and perform a name and Password, then click Sign In.
Figure 2). For 2-post instal- 4. Install the two outer rails into the 4-post equipment rack (c): lation, see the S-Series WebGuide, available at: techdocs.broadcom.com/sseries Secure the rear brackets to the front brackets with six M4x4L (PS-S200, PS-S400) or...
Page 6
PS-S200, PS-S400, PS-S500 Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume...