Download Print this page
3onedata GW1101 Series Quick Installation Manual

3onedata GW1101 Series Quick Installation Manual

Advertisement

Quick Links

GW1101 Series
Modbus Gateway Quick Installation
Guide
3onedata Co., Ltd.
Address:
3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District, Shenzhen
Website:
www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【Package Checklist】
Please check whether the package and accessories are intact
while using the device for the first time.
1. Modbus gateway × 1
2. Quick Installation Guide
3. Software CD
4. Power adapter
5. Certificate
6. Warranty card
7. Lugs
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【Product Overview】
The series products are MODBUS gateway devices. Models
are as follows:
Model I
GW1101-1D(RS-232) (1 RS-232 serial port + 1
100M copper port)
Model II GW1101-1D(RS-485) (1 RS-485/422 serial port + 1
100M copper port)
【Panel Design】
Top view
Model I
Model II
Bottom view
Front view and side view
Model I
Model II
Rear view
1.
RS-232 serial port
2.
RS-485/422 serial port
3.
100M copper port
4.
DIP switch
5.
Power supply input terminal
6.
Copper port indicator LINK
7.
Power supply indicator PWR
8.
Serial port receiving and transmitting indicator

Advertisement

loading

Summary of Contents for 3onedata GW1101 Series

  • Page 1 Model II GW1101-1D(RS-485) (1 RS-485/422 serial port + 1 Model I 100M copper port) 【Panel Design】 GW1101 Series  Top view Modbus Gateway Quick Installation Guide Model I Model II  Rear view 3onedata Co., Ltd. Model II Address: 3/B, Zone 1, Baiwangxin High Technology ...
  • Page 2 Lugs Definition Operation Restore factory Set the DIP switch to ON, 【Mounting Dimension】 defaults power on again, restore Unit: mm factory defaults and set it back Reserved Reserved 【Serial Port Connection】  RS-232 serial port The interface type of this series Model l is 【Disassembling the Device】...
  • Page 3 The copper port has established Power supply an active network connection. 9~48VDC Input power supply The copper port is in a network 2-pin 5.08mm terminal Access terminal LINK Blinking activity state. Consumption The copper port does not establish Model I No-load: 0.53W@9VDC an active network connection.

This manual is also suitable for:

Gw1101-1(rs-232)Gw1101-1d(rs-485)