Section 3: Enrolling Your Fingerprints On The Puppy® Device - Sony FIU-900 Primary User Manual

Section 3: Enrolling Your Fingerprints on the Puppy® Device
SecureSuite® XS Workstation and the FIU-900 Puppy Unit
The FIU-900 fingerprint identity token scans, stores, and matches fingerprints on-board the
device. This means that the Puppy unit is tied to the users that are enrolled within it. Each FIU-
900 device can hold a limited number of fingerprints (a family or small workgroup, for
example), or alternatively, each device can be assigned to an individual user. You can transport
the unit between SecureSuite XS Workstation-enabled client PCs in a client/server environment
only. For more on this, please refer to the SecureSuite XS Server Guide and documentation.
First-time Enrollment
IMPORTANT: Only five distinct users can use their fingerprints to access the PC. These
fingerprint users can enroll as many fingerprints as they wish. However, other users on the PC
*
will need to use a password-only logon.
When you are setting up a new user, you must enter a password for the user, even if the
user will not use the password method, as Windows® interprets this user account as not
requiring security. If you are working with an existing user, you will probably already have a
password, and will not need to enter a new one.
Also, when creating a new user, be sure not to set 'Need to Change Password at Next
Logon' and then choose only fingerprint authentication for that user (no password). This
will cause an error and may result in Windows becoming inoperable. Set the former command
first, and then, once the new password is set, make the user a fingerprint-only user (see step 9
below).
To enroll a user with the FIU-900 fingerprint identity token:
1. On your first restart after installing SecureSuiteXS Workstation, depending on your
operating system, you will see the following:
*
Additional user licenses are available. Contact Sony for more details.
Page 10 Training Your Puppy Unit