7. Beyes limited warranty statement....P10-11 1. Introduction Maxso E600B is designed to be built into the dentist delivery system and op- erate as a seamlessly integrated electric motor system. The integrated motor has an intuitive touchpad interface and is engineered to reduce complexity and provide increased efficiency for optimal treatment results.
1.2 Symbol Following sign may appear in this manual, before or attached files. Some signs stand for this product’s standard and conformity. Conformity to Medical Device Directive 93/42/EEC. Date of manufacturing Manufacturer Serial number Type B Do not trash Consult instruction for use Classification: Class II, Type B 2.
3. Installation requirement Warning • This module should be installed inside the dental delivery unit by autho- rized third party technician • This module requirement AC24V/DC36V power, water and air from the delivery unit 3.1 Connection inside delivery unit a. Board to air supply, control panel cable, motor cable and power cable Air Control Control pannel connect...
Page 5
b. Base, air and water tubing connection Green: spray air Clear: water Blue: Cooling air Air in from pedal 3.2 Connection outside delivery unit a. Control panel System connect Unplug the cap b.Motor...
c. Control panel mounting • Screw panel on the holder • Install the plastic cap in the left or right side of the delivery unit • Adjust angle and tighten the holder and cap 4. Operation Keep press REV Speed display 3 seconds to open or stop Speed rate...
Page 7
4.1 Start Motor • Select the gear ratio 16:1, 1:1 or 1:5 to match the handpiece Gear ratio Speed range 16:1 100-2,500 RPM 2,000-40,000 RPM 10,000-200,000 RPM • Press REV to select motor direction – green for clockwise, yellow for counter clockwise •...
5. Maintenance 5.1 Control Panel Wipe control panel with ethyl alcohol 5.2 Motor Wipe surface with ethyl alcohol Caution • Do not use strong oxidant water or chemical disinfectants to clean motor • Do not dip or wash motor • Inspect o-ring – replace if worn or broken 5.3 Sterilization •...
6. Technical specification Control system: Vector control system Motor type: DC brushless motor Speed: 2,000-40,000rpm Torque: 3.4Ncm Power input: AC 24V/DC36 Motor size: φ22 x L71mm Motor weight: Noise: < 60dB Light source: LED (white light) Air supply: ht) >1.5L/min (0.2MPa) Water supply: >65mL/min (0.2MPa) Control box size:...
7.1 Scope of Warranty BEYES Dental Canada Inc. (‘BEYES’) warrants to the original retail purchaser that it will be at BEYES option to repair or replace components of the dental products manufactured by BEYES (except for components not warranted under ‘Exclusions’) that are defective in material or workmanship under normal use and service.
Page 11
(i) from a person or entity that is not BEYES or one of its authorized dealers; or (ii) from a BEYES dealer that is not authorized to sell the product at issue in the geographic territory where...
Page 12
Beyes Dental Canada Inc. is not responsible for any typographical errors. Subjects to technical changes without notice. *All brands are holders of their respective trademarks.
Need help?
Do you have a question about the Maxso E600B and is the answer not in the manual?
Questions and answers